cheapo protection 0.1 [effect]

-----------------------------------------------------------------------------

Function:

Blocks noise bursts.

*NOTE* As this machine is in beta stage I have not implemented stereo
support. Also Avg/RMS detection methods don't work.

-----------------------------------------------------------------------------

Usage:

1. Set the thresholds
2. Play normally
3. When the machine detects a burst it silences the signal and 
   after a while starts fading the signal in.
You can use <thru> in sequence editor to disable machine. (=bypass)

-----------------------------------------------------------------------------

Parameters:

Hold		The lenght of time the signal is held totally silent [ticks]
Release		The length of the release time of the protection after hold
		is over	[ticks]
Peak		Peak threshold. Detects loud peaks.
Change		Change threshold. Detects bursts that have lots of rapid changes.
Average		Detects a burst if the average signal strength exceeds the
		threshold.
Average Buflen	Length of time for the average detection
Average		Detects a burst if the RMS value of the signal exceeds the
		threshold.
Average Buflen	Length of time for the RMS detection.

Attributes:

Min/Max		Define the area for the corresponding threshold parameter.
		-Min<=threshold<=Max

-----------------------------------------------------------------------------
Revision history:
0.1	Peak/Delta detections work. Mono only.
-----------------------------------------------------------------------------

oh.. almost forgot: YOU NEED BUZZ1.2 TO USE THIS EFFECT

Mikko Apo [http://iki.fi/apo/]
